LabSolutions CS features an innovative operating environment and provides complete data management to ensure secure information in networked laboratories.
UV-3600i Plus - Opciones
UV-VIS-NIR Spectrophotometer
Software: LabSolutions UV-Vis
The combination of the UV-3600i, offering lower stray light levels and higher accuracy, with LabSolutions UV-Vis software, which achieves labor-saving measurements, provides a more convenient analytical environment. LabSolutions UV-Vis software with easy-to-use is included as standard.
UV Accessories & Options
Labsolutions Series
UV-Vis-NIR Spectroscopy Software
-
Shimadzu UV-Vis makes your work faster and easier.
- Simple Easy to use for everyone
- Smart Optimize quality control
- Seamless Easy transfer of measurement data
Información relacionada
-
-
Samples are placed in cells for measurements. -
Multifunctional Software with Multiple Measurement Functions / Enhanced GLP/GMP Support Functions -
-
This trace quantity measurement system can perform measurements simply and accurately, even with ultra-small sample volumes on the order of a few μL. -
This is used to measure samples, without diluting them, with an absorbance too high to be measured using a standard square cell with an optical path length of 10 mm. -
The following accessories are used to continuously supply samples to a sample compartment for measurement. -
-
With relative specular reflectance measurement, the reflectance is calculated from the strength ratio after comparing the light reflected from the reference sample with the light reflected from the measurement sample. -
When the concentration of the sample is too low to be measured using a standard cell with an optical path length of 10 mm, a cell with a longer optical path length is used to enable measurement at the optimum absorption sensitivity. -
The following accessories are used to measure micro-volume samples. -
The following accessories are used for biological component measurement, enzymatic activity measurement and reaction rate analysis for which the sample must be kept at a constant temperature. -
Shimadzu UV-Vis makes your work faster and easier.
- Simple Easy to use for everyone
- Smart Optimize quality control
- Seamless Easy transfer of measurement data -
Since light cannot penetrate opaque (solid) samples, it is reflected on the surface of the samples. -
With absolute specular reflectance measurement, as shown in the figure, a reference sample is not used, the sample-free state (air) is set at 100%, and the reflection of the sample is simply applied to the 100% setting when measuring the sample. -
The transmittance of thin samples such as film with little scattering can be measured by combining the film holder with the standard sample compartment. -
This large-sample compartment enables transmission and reflection measurements of various-shaped samples. -
This unit uses a lens and mask to mask the beam that passes through the integrating sphere opening. -
This software calculates the color values of the measured object from the spectra obtained by the spectrophotometer. -
This software calculates film thickness from the peak positions of the interference pattern caused by the film.
