Nexera Prep - Especificaciones

Preparative Purification Liquid Chromatograph

Contacto

Excellent System Expandability

Solvent Delivery Unit Accommodates a Wide Range of Recovery Volumes

Guidelines for Preparative Scale and Maximum Load

The figure at right shows the guidelines for total component capacity with a 250 mm long column when the target component is highly soluble in the mobile phase, separates from impurities, and ions are suppressed. For isocratic elution, in principle, the total component capacity is proportional to the column volume.

LC-40D

• This solvent delivery unit can handle flow rates ranging from those used in analytical scale to those used in semi-preparative (up to 10 mL/min).
• High-precision analysis is possible even in the semi-micro flow-rate range.

Guidelines for Preparative Scale and Maximum Load

Solvent delivery method	Parallel-type double plunger
Plunger capacity	10 μL
Maximum discharge pressure	44 MPa
Flow rate setting range	0.0001 to 5.0000 mL/min (1.0 to 44 MPa) 5.0001 to 10.0000 mL/min (1.0 to 22 MPa)
Flow rate accuracy	No more than ±1% or ±2 μL/min, whichever is greater (under specified conditions)
Flow rate precision	No more than 0.06% RSD or 0.02 min SD, whichever is greater
Constant pressure solvent delivery	Supported
Plunger rinsing mechanism	Optional available
Operating temperature range	4 to 35 °C
Size and weight	W260 × D500 × H140 mm, 10 kg

Ver menos

LC-20AR

This solvent delivery unit can handle flow rates used in semi-preparative scale (up to 20 mL/min).
Using a recycle kit enables semi-preparative recycling.

Supports Semi-Preparative and Recycle Preparative

Solvent delivery method	Parallel-type double plunger
Plunger capacity	47 μL
Maximum discharge pressure	49 Mpa
Flow rate setting range	0.001 to 20.000 mL/min
Flow rate accuracy	No more than ±1% or ±10 μL/min,whichever is greater (0.1 to 5.0 mL/min)
Flow rate precision	No more than 0.08% RSD or 0.02 min SD, whichever is greater
Constant pressure solvent delivery	Supported
Plunger rinsing mechanism	Syringe or rinsing pump
Operating temperature range	4 to 35 °C
Size and weight	W 260 x H140 x D 500 mm，16 kg

Ver menos

LC-20AP

High flow rates (up to 150 mL/min) enable highly efficient, large-scale preparative fractionation.
Large-scale prep solvent delivery fully supports the preparative fractionation workflow including reinjection to assess purity.
Combine with an FCV-200AL low-pressure gradient unit to perform gradient analysis using up to four mobile phases.

Supports Large-Scale Preparative Fractionation

Solvent delivery method	Parallel-type double plunger
Plunger capacity	250 μL
Maximum discharge pressure	42 Mpa
Flow rate setting range	0.01 to 150.00 mL/min
Flow rate accuracy	No more than ±1% (1 mL/min, 10 MPa)
Flow rate precision	No more than 0.1% RSD or 0.02 min SD,whichever is greater
Constant pressure solvent delivery	Supported
Plunger rinsing mechanism	Syringe or rinsing pump
Operating temperature range	4 to 35 °C
Size and weight	W 260 x H210 x D 500 mm，19 kg

Ver menos

{"title":"Descargas de la hoja de especificaciones","description":"Descargue las \u00faltimas hojas de especificaciones.","source":"product","key":3107,"max":"30","filter_types":["spec_sheet"],"link_title":"Ver otras descargas","link_url":""} {"title":"Descargas","description":"Descargue el folleto m\u00e1s reciente.","source":"product","key":3107,"max":"30","filter_types":["brochures"],"link_title":"Ver otras descargas","link_url":"","pdf_links":[]}