i-Series - Especificaciones

High Performance Liquid Chromatograph

Contacto

LC-2050C (UV model)

Pump

Degassing unit	Five Lines: Mobile phase 4 + Rinse solution 1 [Volume 400 μL]
Pumping method	Parallel-type double plunger
Pulsation	≤ 0.1 MPa [1.0 mL/min,10 MPa, Water]
Flow rate setting range	0.0001 to 10 mL/min
Flow rate accuracy	≤ ±1% or ≤ ±2 μL/min, below whichever is greater [0.01 to 2 mL/min, Specified condition] ≤ ±2% [2 to 5 mL/min, Specified condition]
Flow rate precision	< 0.06 %RSD or < 0.02 minSD, below whichever is greater
Configuration	Four-solvent low-pressure gradient
Gradient / range of set concentrations	0 to 100%, in 0.1% steps
Gradient / concentration accuracy	±0.5% [0.1 to 2 mL/min, 1 to 20 MPa, Specified condition]
Gradient / concentration precision	±0.1% [1 mL/min,10 MPa, Specified condition]
Maximum pressure	50 MPa [0.0001 to 3 mL/min] 44 MPa [3.0001 to 5 mL/min] 22 MPa [5.0001 to 10 mL/min]
System Delay Volume	650 μL [Option: 460 μL, 1100 μL]

Ver menos

Autosampler

Sample injection method	Total-volume sample injection
Injection volume accuracy	±1% [50 μL, N = 10]
Injection volume setting range	0.1 to 100 μL [Option: 0.1 to 50 μL, 1 to 500 μL, 1 to 2,000 μL]
Injection volume reproducibility	RSD < 0.20% [5.0−2000 μL] RSD < 0.25% [2.0−4.9 μL] RSD < 0.5% [1.0−1.9 μL] RSD < 1.0% [0.5−0.9 μL]
Cross-contamination	0.0025% [Caffeine, Specified condition]
Injection cycle time	Min. 14 sec [Specified condition]
Samples for processing	336 [1 mL], 216 [1.5 mL], 112 [4 mL], 4 [MTP/DWP]
Sample cooler	4 to 45°C [Room temperature needs to be 30°C or lower and the humidity 70% or less to go down to 4°C. Room temperature needs to be 15°C or higher to go up to 45°C.]
Injection linearity	> 0.9999 [1 to 100 μL, Specified condition]

Ver menos

Column Oven

Heating and cooling method	Forced air circulation method
Containable column size	Six columns 10 cm long Three columns 30 cm long One 30 cm long column if a CTO unit (optional) for i-Series low-temperature analysis is installed. (Two columns up to 15 cm long or one column 30 cm long if an FCV tubing kit for i-Series low-temperature analysis is also installed.)
Temperature control range	Room temperature −12 °C (−15 °C if an optional unit is installed) to 90 °C
Temperature control precision	±0.1°C
Temperature accuracy	±0.8°C (Specified condition)
Flow rate switching valve	Max. 1 pc

Ver menos

UV Detector

Wavelength range	190 to 700 nm
Spectral bandwidth	8 nm
Wavelength accuracy	≤ ±1 nm
Wavelength Reproducibility	≤ ±0.1 nm
Noise	≤ ±2.5 × 10−6 AU, (250 nm, Specified condition)
Drift	≤ 100 × 10−6 AU/h [250 nm, Specified condition]
Simultaneous monitoring of 2 wavelengths	Enable [Any 2 wavelengths of 190 to 370 nm or 371 to 700 nm]
Linearity	Up to 2.5 AU (5%)
Sampling rate	Up to 100 Hz
Light source	Deuterium (D2) lamp
Flow Cell	12 μL (10 mm, TC), 12 MPa
Option cell	High-Speed: 8 μL [10 mm, TC] Semi-micro: 2.5 μL [5mm, TC]

Ver menos

Miscellaneous

Dimensions	W410×H605×D500 mm [Not including reservoir tray height]
Weight	63 kg
Available pH range	1 to 13
Materials for parts in contact with liquids	Stainless steel (SUS316L, SUS316), FEP, PEEK, PTFE, perfluoroelastomer, ruby, sapphire, Hastelloy® C, GFP, ceramic, PFA, quartz, PPS

Ver menos

{"title":"Descargas de la hoja de especificaciones","description":"Descargue las \u00faltimas hojas de especificaciones.","source":"product","key":4554,"max":"30","filter_types":["spec_sheet"],"link_title":"Ver otras descargas","link_url":""} {"title":"Descargas","description":"Descargue el folleto m\u00e1s reciente.","source":"product","key":4554,"max":"30","filter_types":["brochures"],"link_title":"Ver otras descargas","link_url":"","pdf_links":[]}