AP Series - Especificaciones : Shimadzu Latin America

AP225W

External Calibration Weight Range for Span Calibration	95 to 220.00090 g （200g）
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg
Capacity	220g
Repeatability (Standard deviation)	0.015mg (to 20g) 0.03mg (to 100g) 0.05mg (to Minimum Weight)
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	8 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.1 mg
Minimum Weight ^*2	20 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.

Ver menos

AP224W

Capacity	220 g
Minimum display	0.1 mg

AP224W-AD

Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in ^*1
Minimum display	0.1 mg
Capacity	220 g
Response Time for race Measurements ^*3	2 sec.
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Ionizer	Included
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Display	OEL display (dot matrix)
Pan Size	ø91 mm
Body Dimensions	Approx. 215(W) x 367(D) x 346(H)mm
Weight	Approx. 7.0 kg
Touchless Sensors	Included
Adjustable Internal Windbreak Plate	Not Available
Sample (Concentration) Preparation	Included
Automatic Doors	Included
Clock-CAL	Included
Inspection Support Function	Included
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec.
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP225WD-AD

Linearity ^*2	±0.2 mg /±0.1 mg
Minimum Weight ^*2	30 mg
Repeatability (Standard deviation)	0.1 mg / 0.05 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg / 0.1 mg
Capacity	220 g / 102g
Response Time for race Measurements ^*3	2 sec.
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Ionizer	Included
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Display	OEL display (dot matrix)
Pan Size	ø91 mm
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Weight	Approx. 7.9 kg
Touchless Sensors	Included
Adjustable Internal Windbreak Plate	Included
Sample (Concentration) Preparation	Included
Automatic Doors	Included
Clock-CAL	Included
Inspection Support Function	Included
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec. / 8 sec
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP125WD-AD

Linearity ^*2	±0.2 mg /±0.05 mg
Minimum Weight ^*2	30 mg
Repeatability (Standard deviation)	0.1 mg / 0.02 mg
External Calibration Weight Range for Span Calibration	95 to 120.0090 g (100 g)
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg / 0.1 mg
Capacity	120 g / 52g
Response Time for race Measurements ^*3	2 sec.
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Ionizer	Included
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Display	OEL display (dot matrix)
Pan Size	ø91 mm
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Weight	Approx. 7.9 kg
Touchless Sensors	Included
Adjustable Internal Windbreak Plate	Included
Sample (Concentration) Preparation	Included
Automatic Doors	Included
Clock-CAL	Included
Inspection Support Function	Included
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec. / 8 sec
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP135W-AD

Linearity ^*2	±0.1 mg
Minimum Weight ^*2	30 mg
Repeatability (Standard deviation)	0.05 mg
External Calibration Weight Range for Span Calibration	45 to 135.009 g (100 g)
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg
Capacity	135 g
Response Time for race Measurements ^*3	2 sec.
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Ionizer	Included
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Display	OEL display (dot matrix)
Pan Size	ø91 mm
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Weight	Approx. 7.9 kg
Touchless Sensors	Included
Adjustable Internal Windbreak Plate	Included
Sample (Concentration) Preparation	Included
Automatic Doors	Included
Clock-CAL	Included
Inspection Support Function	Included
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	8 sec.
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP225W-AD

Linearity ^*2	±0.1 mg
Minimum Weight ^*2	20 mg
Repeatability (Standard deviation)	0.015mg (to 20g) 0.03mg (to 100g) 0.05mg (to Minimum Weight)
External Calibration Weight Range for Span Calibration	95 to 220.00090 g （200g）
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg
Capacity	220g
Response Time for race Measurements ^*3	2 sec.
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Ionizer	Included
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Display	OEL display (dot matrix)
Pan Size	ø91 mm
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Weight	Approx. 7.9 kg
Touchless Sensors	Included
Adjustable Internal Windbreak Plate	Included
Sample (Concentration) Preparation	Included
Automatic Doors	Included
Clock-CAL	Included
Inspection Support Function	Included
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	8 sec.
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.

Ver menos

AP135W

External Calibration Weight Range for Span Calibration	45 to 135.009 g (100 g)
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg
Capacity	135 g
Repeatability (Standard deviation)	0.05 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 212(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	8 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.1 mg
Minimum Weight ^*2	30 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP324Y

Capacity	320 g
Minimum display	0.1 mg

AP224Y

Capacity	220 g
Minimum display	0.1 mg

AP124Y

Capacity	120 g
Minimum display	0.1 mg

AP324X

Capacity	320 g
Minimum display	0.1 mg

AP224X

Capacity	220 g
Minimum display	0.1 mg

AP124X

Capacity	120 g
Minimum display	0.1 mg

AP324W

Capacity	320 g
Minimum display	0.1 mg

AP124W

Capacity	120 g
Minimum display	0.1 mg

AP125WD

External Calibration Weight Range for Span Calibration	95 to 120.0090 g (100 g)
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg / 0.1 mg
Capacity	120 g / 52g
Repeatability (Standard deviation)	0.1 mg / 0.02 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec. / 8 sec
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg /±0.05 mg
Minimum Weight ^*2	30 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP225WD

Capacity	220 g/102 g
Minimum display	0.1 mg/0.01 mg

AP125WD

Capacity	120 g/52 g
Minimum display	0.1 mg/0.01 mg

AP135W

Capacity	135 g
Minimum display	0.01 mg

AP324Y

External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	No
Minimum display	0.1 mg
Capacity	320 g
Repeatability (Standard deviation)	0.15 mg
Inspection Support Function	Not Included
Display	OEL display (dot matrix)
Weight	Approx. 6.5 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Not Included
Clock-CAL	Not Included
HPLC Buffer Solution Preparation	Not Included
Sample (Concentration) Preparation	Not Included
mol Conversion Function	Not Included
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.3 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)

Ver menos

AP224Y

External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	No
Minimum display	0.1 mg
Capacity	220 g
Repeatability (Standard deviation)	0.1 mg
Inspection Support Function	Not Included
Display	OEL display (dot matrix)
Weight	Approx. 6.5 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Not Included
Clock-CAL	Not Included
HPLC Buffer Solution Preparation	Not Included
Sample (Concentration) Preparation	Not Included
mol Conversion Function	Not Included
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)

Ver menos

AP124Y

External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)
Calibration Weight	No
Minimum display	0.1 mg
Capacity	120 g
Repeatability (Standard deviation)	0.1 mg
Inspection Support Function	Not Included
Display	OEL display (dot matrix)
Weight	Approx. 6.5 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Not Included
Clock-CAL	Not Included
HPLC Buffer Solution Preparation	Not Included
Sample (Concentration) Preparation	Not Included
mol Conversion Function	Not Included
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)

Ver menos

AP324X

External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	Built-in
Minimum display	0.1 mg
Capacity	320 g
Repeatability (Standard deviation)	0.15 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Not Included
Sample (Concentration) Preparation	Not Included
mol Conversion Function	Included
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.3 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer

Ver menos

AP224X

External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in
Minimum display	0.1 mg
Capacity	220 g
Repeatability (Standard deviation)	0.1 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Not Included
Sample (Concentration) Preparation	Not Included
mol Conversion Function	Included
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer

Ver menos

AP124X

External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)
Calibration Weight	Built-in
Minimum display	0.1 mg
Capacity	120 g
Repeatability (Standard deviation)	0.1 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Not Included
Sample (Concentration) Preparation	Not Included
mol Conversion Function	Included
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer

Ver menos

AP324W

External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	Built-in ^*1
Minimum display	0.1 mg
Capacity	320 g
Repeatability (Standard deviation)	0.15 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.3 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP224W

External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in ^*1
Minimum display	0.1 mg
Capacity	220 g
Repeatability (Standard deviation)	0.1 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP124W

External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)
Calibration Weight	Built-in ^*1
Minimum display	0.1 mg
Capacity	120 g
Repeatability (Standard deviation)	0.1 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec.
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg
Minimum Weight ^*2	200 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP225WD

External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in ^*1
Minimum display	0.01 mg / 0.1 mg
Capacity	220 g / 102g
Repeatability (Standard deviation)	0.1 mg / 0.05 mg
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Ionizer	Optional
Clock-CAL	Included
HPLC Buffer Solution Preparation	Included
Sample (Concentration) Preparation	Included
mol Conversion Function	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec. / 8 sec
Response Time for race Measurements ^*3	2 sec.
Linearity ^*2	±0.2 mg /±0.1 mg
Minimum Weight ^*2	30 mg
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos

AP324W-AD

Linearity ^*2	±0.3 mg
Minimum Weight ^*2	200 mg
Repeatability (Standard deviation)	0.15 mg
External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	Built-in ^*1
Minimum display	0.1 mg
Capacity	320 g
Response Time for race Measurements ^*3	2 sec.
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Ionizer	Included
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Display	OEL display (dot matrix)
Pan Size	ø91 mm
Body Dimensions	Approx. 215(W) x 367(D) x 346(H)mm
Weight	Approx. 7.0 kg
Touchless Sensors	Included
Adjustable Internal Windbreak Plate	Not Available
Sample (Concentration) Preparation	Included
Automatic Doors	Included
Clock-CAL	Included
Inspection Support Function	Included
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time ^*4	2 sec.
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Ver menos